Hedman Header Set - Ford SBW (Mustang 64-73) Short #88400

$563.50
In stock
SKU
HED88400

Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design

Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.

These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.

These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.

Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.

SPECIFICATIONS :

TUBE DIAMETER: 1-1/2"

TUBE STYLE: Shorty

COLLECTOR STYLE: Ball and Socket Style (Gasketless)

AIR CONDITIONING: Yes

AUTOMATIC TRANSMISSION - COLUMN: No

AUTOMATIC TRANSMISSION - FLOOR: Yes

MANUAL TRANSMISSION - COLUMN: No

MANUAL TRANSMISSION - FLOOR: No

COLLECTOR ATTACHMENT: 2-1/2"

COLLECTOR SIZE: 2-1/2"

REDUCER OUTLET SIZE: 2-1/2"

EXHAUST SYSTEM DIAMETER: 2-1/2 "

CONTENTS: Header(s), new bolts, gasket(s) to head, reducer(s) and hardware, instructions

E.O. # No

EMISSIONS NOTES: NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only.

ENGINE: Ford SB 260-289-302W

ENGINE VERSION: Ford Windsor Block (W)

ENGINE NOTES: 260-302W

FINISH: Uncoated

FINISH TYPE: Uncoated Mild steel

FLANGE STYLE: Standard

FLANGE THICKNESS: 0.3125 in.

HEADER PORT SHAPE: Square

HEADER STYLE: Mid-Length Tube

NOTES: 66-73 Ford Mustang 260-302W

PORT SHAPE: Square

POWER STEERING: Yes

MATERIAL: Mild Steel

TUBE DESIGN: MID-LENGTH

TUBE LENGTH: Short Tubes

TUBE MATERIAL THICKNESS: 16g

TUBE SIZE: 1-1/2 in.

VARIATIONS: 88406, 88408

WITH A.I.R. SYSTEM: No

WITH EGR: No

WELD-UP: No

TUNED: No

BOLTS/STUDS INCLUDED: Yes

CATALYTIC CONVERTER(S) INCLUDED: No

COLLECTOR BOLTS INCLUDED: Yes

CROSSOVER PIPE INCLUDED: No

GASKET OR SEAL INCLUDED: Yes

INSTALLATION HARDWARE INCLUDED: Yes

MOTOR MOUNTS INCLUDED: No

MOUNTING HARDWARE INCLUDED: Yes

REDUCERS INCLUDED: Yes

Y-PIPE INCLUDED: No

QUANTITY: Sold as a pair.

PRIMARY TUBE GAUGE: 16g

PRIMARY TUBE DIAMETER (IN): 1.50"

PACKAGE CONTENTS: Set of Headers, mounting hardware and gaskets

HEADER MATERIAL: Mild Steel

HEADER FINISH: Uncoated

CYLINDER HEAD PORT SHAPE: Square

CYLINDER HEAD: Stock Profile Heads

HEADER CONSTRUCTION: Standard-Duty

REPLACEMENT GASKET: 27340

REPLACEMENT HEAD FLANGE GASKET: 27340

 

More Information
Part Type Headers
Product Line Exhaust
Brand Hedman
Write Your Own Review
You're reviewing:Hedman Header Set - Ford SBW (Mustang 64-73) Short #88400
Your Rating