Crane PowerMax cam and lifter kits feature cams with lobe patterns designed to balance intake and exhaust flow. Their unique profiles produce maximum low, mid, and upper rpm power. Many PowerMax cams are designed to maximize the effects of nitrous oxide, supercharger, and turbocharger systems. These kits are available in both hydraulic and mechanical lift versions.


Cam Style: Hydraulic flat tappet

Basic Operating RPM Range: 2,500-5,500

Intake Duration at 050 inch Lift: 226

Exhaust Duration at 050 inch Lift: 226

Duration at 050 inch Lift: 226 int./226 exh.

Advertised Intake Duration: 288

Advertised Exhaust Duration: 288

Advertised Duration: 288 int./288 exh.

Intake Valve Lift with Factory Rocker Arm Ratio: 0.537 in.

Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.537 in.

Valve Lift with Factory Rocker Arm Ratio: 0.537 int./0.537 exh.

Lobe Separation (degrees): 112

Grind Number: H-288

Computer-Controlled Compatible: No

Lifters Included: Yes

Lifter Style: Hydraulic flat tappet

Valve Springs Included: No

Retainers Included: No

Locks Included: No

Valve Stem Seals Included: No

Timing Chain and Gears Included: No

Assembly Lubricant Included: Yes

Pushrods Included: No

Rocker Arms Included: No

Gaskets Included: No

Valve Springs Required: Yes

Quantity: Sold as a kit.

More Information
Part Type Cam & Lifter Kits
Product Line Cams & Valvetrain
Brand Crane Cams
Write Your Own Review
You're reviewing:CRANE CAM Cam & Lifter Kit Ford FE 352-428 #344342
Your Rating