Crane PowerMax cam and lifter kits feature cams with lobe patterns designed to balance intake and exhaust flow. Their unique profiles produce maximum low, mid, and upper rpm power. Many PowerMax cams are designed to maximize the effects of nitrous oxide, supercharger, and turbocharger systems. These kits are available in both hydraulic and mechanical lift versions.
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range:2,500-5,500
Intake Duration at 050 inch Lift: 226
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 226 int./230 exh.
Advertised Intake Duration: 288
Advertised Exhaust Duration: 292
Advertised Duration: 288 int./292 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.522 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.530 in.
Valve Lift with Factory Rocker Arm Ratio: 0.522 int./0.530 exh.
Lobe Separation (degrees): 112
Grind Number: H-288-2
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
Valve Springs Included: No
Retainers Included: No
Locks Included: No
Valve Stem Seals Included: No
Timing Chain and Gears Included: No
Assembly Lubricant Included: Yes
Pushrods Included: No
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required Yes
|Part Type||Cam & Lifter Kits|
|Product Line||Cams & Valvetrain|