Holley Carburetor 650CFM – Double Pumper (HP) #82651SA

$1,265.00
In stock
SKU
HOL82651SA

Holley Carburetor, Aluminum Street HP, 650 cfm, Square Bore, 4-barrel, Mechanical Secondary, Tumble Polished, Each#HOL82651SA

Holley is proud to introduce the all new Aluminum Street HP™. They utilize the best features from Holley's Race Bred 4150 HP™ carbs, but are tamed for street and light competition use. The Street HP features an aluminum contoured main body design taken from the race winning 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities.

The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability and maximum performance. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.

Features :

Screw in air bleeds for precision tuning capabilities

Four corner idle for precise idle control

Mechanical secondaries for awesome tire turning performance

Dual accelerator pumps for additional fuel under initial acceleration

Dual feed fuel inlets for constant high volume fuel delivery

Available in 650, 750, 850, and 950 CFM versions

Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing

Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.

Specifications :

Barrels: 4
Booster: Straight
Brand: Holley
Carburetor Use: Performance and Race
CFM: 650
Choke: None
Condition: New
Emission Code: 3
Finish: Shiny
Fuel: Gasoline
Marine Use: No
Material: Aluminum
Model: 4150
Primary Main Jet: 69
Primary Power Valve: 6.5
Primary Pump Nozzle Size: 28
Product Type: Carburetor
Secondaries: Mechanical
Secondary Main Jet: 75
Secondary Pump Nozzle Size: 29
Supercharged Application: No
Throttle Bore: 1.688 inch
Venturii Size: 1.250 inch
Manufacturer's Warranty: Limited 90 Day

Note : 

This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
 

 

 

More Information
Part Type Carburettors
Product Line Carburettors & Accessories
Brand Holley
Write Your Own Review
You're reviewing:Holley Carburetor 650CFM – Double Pumper (HP) #82651SA
Your Rating